Wash the rubber industry cloth industry filter cloth

Industrial filter cloth dust filter bag cleaning:

1. Clear ash: Use high -frequency vibration to remove the large dust particles that will enter the wall of the filter bag.

2. Chemical experimental treatment: Extract the cloth bag sample, use professional instruments to detect the ingredients of the filter bag, so as to choose the compatible washing raw material, and the maximum cleaning filter bag without any damage to the filter bag.

3. Cleaning: Select suitable washing raw materials and strictly proportion, low temperature water cleaning, uniform water flow, moderate strength, no mechanical damage to the filter bag.

4. Drying: Use about 110 ° C to dry at about 110 ° C to keep the filter bag's diligence stability. After drying, the filter bag does not deform and does not shrink back.

5. Repair: Repair the damaged filter bags such as corrosion and holes generated due to use. 6. Detection: Use the instrument to detect physical indicators after cleaning the filter bag to ensure that the quality of cleaning meets the requirements!

Find the wear or ash, check or replace the cloth bag in time. Pay a lot of attention to the running state of the bag dust collector, observe its pressure difference changes, and check the ash system and the ash emission system. The thermal insulation measures of the cloth bag dust collector will not occur if they are not done well. If the outside air flows into the dust collector, it will change the internal temperature. The leakage of the cold air will reduce the temperature of the dust collector to a large extent. It will cause the filter bag.

first. The most important thing for us is to consider the nature of the filter. Its factor is more than 75%of the importance of the filter cloth of the plate frame filter machine.

A. The stripping performance of the filter slag directly image the work efficiency of the filter equipment equipment. The surface of the filtration slag is smooth and non -adhesive, and the filter fluid will quickly ooze from the midfilition cloth. The filtration time period will be high. On the contrary, the filter slag is adhesive, and the filtration time will be long, of course, the efficiency will be reduced accordingly. And, the stronger the adhesion, the lower the efficiency. At this time we have to choose a single -silk filter or satin weaving filter cloth.

B. Choose according to chemicals such as acid and alkali of the filter fluid, and choose the type of filter cloth that suits you at different degrees of acid and alkali. The strongest acid resistance is polyester filter cloth. The strongest alkali resistance is the Veon filter cloth.

C. Whether the particles are uniform, whether the shape is uniform, and whether the shape is hard, so as to consider the abrasion resistance of the filter cloth.